Introduction

With the CNAP Blood Pressure monitor from CNSystems one can measure continuous blood pressure non-invasively. Biopac now also offers the NIBP100E amplifier with CNAP technology. This system does not require a separate CNAP Blood Pressure monitor, but instead the CNAP technology is applied in a Biopac amplifier module. Note that AcqKnowledge 5.0.7 or higher is required for the NIBP100E.

Availability, support and advice

Two CNAP monitors are part of the Biopac setup in lab SB04 at the FSW.  SOLO provides limited support for CNAP equipment. 

Resources

• CNAP Blood Pressure monitor official website
• CNAP 500 monitor manual
• Biopac NIBP100E Amplifier information
• Webinar on the Biopac NIBP100E