Skip to Content

Observation Equipment in Agora

Last modified by SOLO SA on 2026/04/30 11:10

How to use the observation equipment in Agora

1757937303464-265.png

1757937709845-999.pngPress the red switch to turn on the system.

1757937303464-265.png

1757937905526-207.pngTurn on PC.

1757937303464-265.png

1757940918457-540.pngStart up the ATEM software Control.

1757937303464-265.png

1757938223307-843.pngThe buttons here you use to choose which
camera you want to be recorded.

1757937303464-265.png

1757938883342-268.png

These buttons can be used to switch a cam to your preview screen.

This camera is controllable with the controller (if supported).

1757937303464-265.png

1757939103449-912.pngThis switch can be used to get your preview screen to your program screens smoothly.

1757937303464-265.png

1757939327088-173.pngMake sure you check if there is audio.
You can do this by clicking the capture tab.
If you see the audio bars moving, you’re all set.

1757937303464-265.png